FUEL TANK DISASSEMBLY


  1. REMOVE FUEL PUMP GAUGE RETAINER


    1. A01INQ1E01
      Text in Illustration
      *1 SST (Plate)
      *2 SST (Claw)

      Temporarily install SST (plate and 2 claws) to the fuel pump gauge retainer.

      SST
      09808-14030

      Tech Tips


      • Be sure to use 2 SST (claws) as shown in the illustration.

      • Engage SST (claws) securely with the fuel pump gauge retainer ribs to secure SST.

    2. While securely pressing SST (claws) against the fuel pump gauge retainer ribs, install the 2 bolts.

      Tech Tips

      Install SST while pressing SST (claws) against the fuel pump gauge retainer (towards the center of SST).

    3. Install SST (handle).

    4. A01IRFVE02

      Lightly press down on SST to prevent it from separating from the fuel pump gauge retainer. While pressing SST, rotate the handle slowly to loosen the fuel pump gauge retainer.

      SST
      09808-14030
      Text in Illustration
      A01ISM9 Turn

      Note


      • Do not use any tools other than those specified in this operation. Damage to the fuel pump gauge retainer or fuel tank may result.

      • Do not press down on SST excessively as this may make the fuel pump gauge retainer hard to rotate and may damage components.

      • Make sure to rotate SST (handle) horizontally. If SST (handle) is rotated at an angle, SST may come off.

      • Do not spin SST too fast or use an impact wrench as this may result in damage to components.

      • If SST comes off of the fuel pump gauge retainer, loosen SST (bolts) and reinstall SST.

      Tech Tips

      The tips of SST (claws) can be fitted onto the ribs of the fuel pump gauge retainer.

    5. Remove the fuel pump gauge retainer while holding the fuel suction with pump by hand.

  2. REMOVE FUEL SUCTION WITH PUMP ASSEMBLY


    1. Remove the fuel suction with pump from the fuel tank.

      Note

      Make sure that the fuel sender gauge arm does not bend.

    2. A01ITPCE01
      Text in Illustration
      *1 Gasket

      Remove the gasket from the fuel tank.

  3. REMOVE NO. 1 FUEL TANK CUSHION


    1. A01ITIA

      Remove the 4 cushions.

  4. REMOVE NO. 2 FUEL TANK CUSHION


    1. A01IO59

      Remove the 2 cushions.

  5. REMOVE FUEL TANK MAIN TUBE SUB-ASSEMBLY


    1. A01IRAH

      Detach the 4 clamps and remove the fuel tank main tube.

  6. REMOVE NO. 1 FUEL EVAPORATION TUBE SUB-ASSEMBLY


    1. A01IPHA

      Detach the 3 clamps and remove the No. 1 fuel evaporation tube.

  7. REMOVE NO. 1 CHARCOAL CANISTER OUTLET HOSE


    1. A01IUK4

      Detach the clamp and remove the No. 1 charcoal canister outlet hose.