FUEL PRESSURE REGULATOR REMOVAL


  1. REMOVE FUEL SUCTION WITH PUMP ASSEMBLY


    1. Remove the fuel suction with pump Click here.

  2. REMOVE FUEL SENDER GAUGE ASSEMBLY


    1. A01INT5

      Disconnect the connector of the fuel sender gauge.

    2. Remove the harness protector from the wire harness.

    3. Disconnect the 3 harness clamps.

      Note

      Do not damage the wire harness.

    4. A01IURQE01
      Text in Illustration
      *1 Lock

      Release the lock and slide the fuel sender gauge assembly to remove it.

  3. REMOVE FUEL PUMP

    Note

    Do not separate the tube indicated in the illustration Click here.


    1. A01IOJ3

      Disconnect the fuel pump filter hose.

    2. A01IRO4

      Using a screwdriver with its tip wrapped in protective tape, detach the 2 claws and remove the fuel filter and fuel pump from the fuel sub-tank.

    3. A01IO1V

      Using needle-nose pliers, detach the 2 claws and remove the No. 1 fuel suction support.

    4. A01IUPX

      Detach the 5 claws on the filter and remove the fuel pump from the fuel filter.

      Note


      • Do not damage the fuel pump filter.

      • Do not remove the suction filter.

      • Do not use either the fuel pump or the suction filter if the suction filter is removed from the fuel pump.

    5. A01IRNV

      Disconnect the fuel pump harness connector.

    6. A01INRUE01

      Remove the O-ring from the fuel filter.

    7. Remove the fuel pump spacer from the fuel pump assembly.

      Text in Illustration
      *1 O-Ring
      *2 Fuel Pump Spacer

  4. REMOVE FUEL PRESSURE REGULATOR ASSEMBLY


    1. A01IMXR

      Using a screwdriver with its tip wrapped in protective tape, remove the fuel pressure regulator assembly.

      Note

      Slowly pull out the fuel pressure regulator assembly because the O-ring is firmly installed between the regulator and the fuel filter.

    2. A01IO9IE01
      Text in Illustration
      *1 O-Ring

      Remove the 2 O-rings from the pressure regulator.