INJECTOR DRIVER REMOVAL


  1. REMOVE NO. 1 ENGINE COVER


    1. A01INMI

      Hold the rear of the cover and slowly raise it to detach the clip on the rear of the cover. Continue to raise the cover to detach the 3 clips on the front and side of the cover and remove the cover.

      Note

      Attempting to disengage both front and rear clips at the same time may cause the cover to break.

  2. REMOVE BATTERY SERVICE HOLE COVER


    1. A01ITOM

      Remove the clip and battery service hole cover.

  3. REMOVE RADIATOR SUPPORT OPENING COVER


    1. A01IRWC

      Remove the 5 clips and radiator support opening cover.

  4. REMOVE INJECTOR DRIVER


    1. A01IPA6

      Detach the clamp and disconnect the 4 injector driver connectors.

    2. A01IOBA

      Remove the 3 bolts and injector driver.

    3. A01IO2Q

      Remove the 4 screws and injector driver bracket.