FUEL SUPPLY PUMP INSPECTION


  1. INSPECT FUEL SUPPLY PUMP ASSEMBLY


    1. A01IN1FE02
      Text in Illustration
      *1

      Component without harness connected

      (Suction Control Valve)

      Inspect the suction control valve.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1 - 2 20°C (68°F) 1.9 to 2.3 Ω

        Tech Tips

        The temperature indicated in "Condition" is the temperature of the suction control valve.

        If the result is not as specified, replace the suction control valve assembly.

    2. Inspect the fuel temperature sensor Click here.

      If the result is not as specified, replace the fuel temperature sensor.