INJECTOR DRIVER REMOVAL


  1. REMOVE NO. 1 ENGINE COVER


    1. A01INMI

      Hold the rear of the No. 1 engine cover and slowly raise it to detach the clip on the rear of the No. 1 engine cover. Continue to raise the No. 1 engine cover to detach the 3 clips on the front and side of the No. 1 engine cover and remove the No. 1 engine cover.

      Note

      Attempting to disengage both front and rear clips at the same time may cause the cover to break.

  2. REMOVE RADIATOR SUPPORT OPENING COVER


    1. A01IS0M

      Remove the 3 clips.

    2. Detach the 4 hooks and remove the radiator support opening cover.

  3. REMOVE INJECTOR DRIVER


    1. A01IPA6

      Detach the clamp and disconnect the 4 injector driver connectors.

    2. A01IOBA

      Remove the 3 bolts and injector driver.

    3. A01IO2Q

      Remove the 4 screws and injector driver bracket.