DRIVE BELT REMOVAL


  1. REMOVE NO. 1 ENGINE UNDER COVER


    1. A01IUIX

      Remove the 6 bolts and 10 clips.

    2. Remove the No. 1 engine under cover.

  2. REMOVE REAR ENGINE UNDER COVER RH


    1. A01IQ51

      Remove the 5 clips and rear engine under cover RH.

  3. REMOVE FRONT SUSPENSION MEMBER REINFORCEMENT RH


    1. A01INC5

      Remove the 4 bolts and front suspension member reinforcement RH.

  4. REMOVE FAN AND GENERATOR V BELT


    1. Using SST and a 22 mm wrench, rotate the V-ribbed belt tensioner pulley counterclockwise to loosen the fan and generator V belt tension. Then remove the fan and generator V belt.

      SST
      09216-42010

      CAUTION:


      • Be careful as the wrench only fits loosely on the belt tensioner tool set point. The wrench may come off the set point and cause injuries.

      • Be careful that your hands do not become jammed between parts such as the fan and generator V belt, pulleys, etc.

      Note

      Make sure SST is installed as shown in the illustration. If not, SST and/or the fan and generator V belt may not be able to be removed.

      A01ISZME02
      Text in Illustration
      *A w/o Air Conditioning System *B w/ Air Conditioning System