CYLINDER HEAD DISASSEMBLY


  1. REMOVE INTAKE VALVE

    Tech Tips

    Arrange the valves, inner compression springs, valve spring retainers and valve spring retainer locks in the correct order.


    1. Place the cylinder head on a wooden block.

    2. A01IOSFE04

      Using SST, compress the inner compression spring and remove the valve spring retainer lock.

      SST
      09202-70020

    3. Remove the valve spring retainer, inner compression spring and intake valve.

  2. REMOVE EXHAUST VALVE

    Tech Tips

    Arrange the valves, inner compression springs, valve spring retainers and valve spring retainer locks in the correct order.


    1. Place the cylinder head on a wooden block.

    2. A01INU0E04

      Using SST, compress the inner compression spring and remove the valve spring retainer lock.

      SST
      09202-70020

    3. Remove the valve spring retainer, inner compression spring and exhaust valve.

  3. REMOVE VALVE STEM OIL SEAL


    1. A01IPL2

      Using needle-nose pliers, remove the valve stem oil seal.

  4. REMOVE VALVE SPRING SEAT PLATE WASHER


    1. A01ITDQ

      Using compressed air and a magnet hand, remove the valve spring seat plate washer by blowing air.