AIR FUEL RATIO SENSOR (for Sensor 1) REMOVAL


  1. REMOVE NO. 1 ENGINE COVER


    1. A01IRDDE01

      Lift the No. 1 engine cover to detach the 4 clips in the order shown in the illustration and remove the No. 1 engine cover.

      Note

      Attempting to disengage both front and rear clips at the same time may cause the No. 1 engine cover to break.

  2. REMOVE AIR FUEL RATIO SENSOR


    1. A01IN9PE01

      Detach the 2 clamps.

    2. Disconnect the air fuel ratio sensor connector.

    3. Raise the air fuel ratio sensor connector to remove the air fuel ratio sensor connector from the bracket.

    4. A01INVWE01

      Using SST, remove the air fuel ratio sensor.

      SST
      09224-00011