MANIFOLD ABSOLUTE PRESSURE SENSOR REMOVAL


  1. REMOVE NO. 1 ENGINE COVER


    1. A01IRDDE01

      Lift the No. 1 engine cover to detach the 4 clips in the order shown in the illustration and remove the No. 1 engine cover.

      Note

      Attempting to disengage both front and rear clips at the same time may cause the No. 1 engine cover to break.

  2. REMOVE ENGINE OIL LEVEL DIPSTICK


    1. A01IN3U

      Remove the engine oil level dipstick.

  3. REMOVE TURBO PRESSURE SENSOR ASSEMBLY


    1. A01IQ2H

      Disconnect the turbo pressure sensor connector.

    2. Using a T27 "TORX" socket wrench, remove the bolt and turbo pressure sensor assembly.