INTAKE AIR TEMPERATURE SENSOR INSTALLATION


  1. INSTALL INTAKE AIR TEMPERATURE SENSOR


    1. A01IT8BE01

      Install the intake air temperature sensor in the position shown in the illustration and rotate the sensor 45° in the clockwise direction to lock it.

    2. Connect the intake air temperature sensor connector.

  2. INSTALL BATTERY TRAY

  3. INSTALL BATTERY

  4. INSTALL BATTERY INSULATOR

  5. INSTALL BATTERY CLAMP SUB-ASSEMBLY


    1. Attach the hook of the battery clamp sub-assembly to the battery carrier.

    2. Partially tighten the nut and temporarily install the bolt.

    3. Adjust the battery clamp sub-assembly position.

    4. Tighten the nut and bolt.

      Torque:
      for bolt
      17 N*m  { 168 kgf*cm, 12 ft.*lbf }
      for nut
      3.5 N*m  { 36 kgf*cm, 31 in.*lbf }

  6. CONNECT CABLE TO POSITIVE BATTERY TERMINAL

  7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.