INTAKE AIR TEMPERATURE SENSOR REMOVAL


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. DISCONNECT CABLE FROM POSITIVE BATTERY TERMINAL

  4. REMOVE BATTERY CLAMP SUB-ASSEMBLY


    1. A01ININ

      Remove the bolt and loosen the nut.

    2. Detach the hook of the battery clamp sub-assembly from the battery carrier, and then remove the battery clamp sub-assembly.

  5. REMOVE BATTERY INSULATOR

  6. REMOVE BATTERY

  7. REMOVE BATTERY TRAY

  8. REMOVE INTAKE AIR TEMPERATURE SENSOR


    1. A01INQ5

      Disconnect the intake air temperature sensor connector.

    2. A01ITUEE01

      Release the lock and rotate the intake air temperature sensor 45° in the counterclockwise direction to remove it.