CAMSHAFT POSITION SENSOR REMOVAL


  1. REMOVE NO. 1 ENGINE COVER


    1. A01IRDDE01

      Lift the No. 1 engine cover to detach the 4 clips in the order shown in the illustration and remove the No. 1 engine cover.

      Note

      Attempting to disengage both front and rear clips at the same time may cause the No. 1 engine cover to break.

  2. REMOVE ENGINE COVER

    A01IRTM

  3. REMOVE CAMSHAFT POSITION SENSOR


    1. A01IUP4

      Disconnect the camshaft position sensor connector.

    2. Using an E6 "TORX" socket wrench, remove the bolt and camshaft position sensor.