PARKING BRAKE CABLE REMOVAL


  1. PRECAUTION

    CAUTION:

    Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

    Note


    • w/ Navigation System for HDD:

      After the ignition switch is turned off, the HDD navigation system requires approximately a minute to record various types of memory and settings. As a result, after turning the ignition switch off, wait a minute or more before disconnecting the cable from the negative (-) battery terminal.

    • When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE FRONT SEAT ASSEMBLY LH


    1. Remove the front seat assembly LH Click here.

  4. REMOVE FRONT SEAT ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  5. REMOVE CONSOLE BOX ASSEMBLY


    1. Remove the console box assembly Click here.

  6. REMOVE NO. 2 CONSOLE BOX MOUNTING BRACKET


    1. A01ITOQ

      Fold back the floor carpet, and remove the 4 bolts and No. 2 console box mounting bracket.

  7. DISCONNECT PARKING BRAKE CABLE


    1. A01IOR0E01
      Text in Illustration
      *1 No. 2 Parking Brake Cable
      *2 No. 3 Parking Brake Cable

      Disconnect the No. 3 parking brake cable from the parking brake equalizer as shown in the illustration.

    2. Disconnect the No. 2 parking brake cable from the parking brake equalizer.

      Tech Tips

      Use the same procedure described for the No. 3 parking brake cable.

  8. REMOVE REAR WHEEL

  9. REMOVE REAR FLOOR SIDE MEMBER COVER LH (for 1ZR-FAE)


    1. A01IN3J

      Remove the nut, 2 bolts and rear floor side member cover LH.

  10. REMOVE REAR FLOOR SIDE MEMBER COVER LH (for 2ZR-FAE)


    1. A01IN3J

      Remove the nut, 2 bolts and rear floor side member cover LH.

  11. REMOVE REAR FLOOR SIDE MEMBER COVER LH (for 1AD-FTV)


    1. A01IN3J

      Remove the nut, 2 bolts and rear floor side member cover LH.

  12. REMOVE REAR FLOOR SIDE MEMBER COVER LH (for 2AD-FHV)


    1. A01IN3J

      Remove the nut, 2 bolts and rear floor side member cover LH.

  13. REMOVE REAR FLOOR SIDE MEMBER COVER LH (for 1WW)


    1. A01IN3J

      Remove the nut, 2 bolts and rear floor side member cover LH.

  14. REMOVE REAR FLOOR SIDE MEMBER COVER RH (for 1ZR-FAE)


    1. A01ISBE

      Remove the nut, 2 bolts and rear floor side member cover LH.

  15. REMOVE REAR FLOOR SIDE MEMBER COVER RH (for 2ZR-FAE)


    1. A01ISBE

      Remove the nut, 2 bolts and rear floor side member cover RH.

  16. REMOVE REAR FLOOR SIDE MEMBER COVER RH (for 1AD-FTV)


    1. A01ISBE

      Remove the nut, 2 bolts and rear floor side member cover RH.

  17. REMOVE REAR FLOOR SIDE MEMBER COVER RH (for 2AD-FHV)


    1. A01ISBE

      Remove the nut, 2 bolts and rear floor side member cover RH.

  18. REMOVE REAR FLOOR SIDE MEMBER COVER RH (for 1WW)


    1. A01ISBE

      Remove the nut, 2 bolts and rear floor side member cover RH.

  19. REMOVE FRONT EXHAUST PIPE ASSEMBLY


    1. for 1ZR-FAE:

      Remove the front exhaust pipe assembly Click here.

    2. for 2ZR-FAE:

      Remove the front exhaust pipe assembly Click here.

    3. for 1AD-FTV:

      Remove the front exhaust pipe assembly Click here.

    4. for 2AD-FHV:

      Remove the front exhaust pipe assembly Click here.

    5. for 1WW:

      Remove the front exhaust pipe assembly Click here.

  20. REMOVE NO. 2 FRONT FLOOR HEAT INSULATOR


    1. A01ISQ2

      Remove the 3 nuts and No. 2 front floor heat insulator.

  21. DISCONNECT REAR DISC BRAKE CYLINDER ASSEMBLY LH


    1. A01IQLJ

      Remove the 2 bolts and disconnect the rear disc brake cylinder.

      Note


      • Do not disconnect the flexible hose from the disc brake cylinder.

      • Do not twist or bend the flexible hose.

    2. Hang the disc brake cylinder with a piece of wire.

  22. DISCONNECT REAR DISC BRAKE CYLINDER ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  23. DISCONNECT NO. 3 PARKING BRAKE CABLE ASSEMBLY


    1. Disconnect the No. 3 parking brake cable Click here.

  24. DISCONNECT NO. 2 PARKING BRAKE CABLE ASSEMBLY

    Tech Tips

    Use the same procedure described for the No. 3 parking brake cable.

  25. REMOVE NO. 2 PARKING BRAKE CABLE ASSEMBLY


    1. A01IUFNE01
      Text in Illustration
      *1 Spring Clip

      Detach the spring clip of the No. 2 parking brake cable from the backing plate. Then disconnect the No. 2 parking brake cable from the backing plate.

    2. A01IULH

      Remove the bolt and casing cap from the body.

    3. Detach the clamp.

    4. Remove the 5 bolts and the No. 2 parking brake cable.

      A01IOFE

  26. REMOVE NO. 3 PARKING BRAKE CABLE ASSEMBLY


    1. A01IUFNE01
      Text in Illustration
      *1 Spring Clip

      Detach the spring clip of the No. 3 parking brake cable from the backing plate. Then disconnect the No. 3 parking brake cable from the backing plate.

    2. A01IOJT

      Remove the bolt and casing cap from the body.

    3. Detach the clamp.

    4. Remove the 4 bolts and the No. 3 parking brake cable.

      A01IN3Z