Click here

REAR BRAKE DISASSEMBLY

Click here
Click here Click here
  1. Click here

    REMOVE CYLINDER BOOT


    1. A01IO9G

      Using a screwdriver, remove the cylinder boot from the piston.

      Tip:

      Tape the screwdriver tip before use.

      Note:

      Be careful not to damage the brake piston or cylinder.

  2. Click here

    REMOVE REAR DISC BRAKE PISTON


    1. Place a piece of cloth between the piston and disc brake cylinder assembly.

    2. A01ISX8

      Apply compressed air to remove the piston from the disc brake cylinder assembly.

      CAUTION:

      Do not place your fingers in front of the piston when using compressed air.

      Note:

      Do not allow any brake fluid to spatter.

  3. Click here

    REMOVE PISTON SEAL


    1. A01IRYZ

      Using a screwdriver, remove the piston seal from the disc brake cylinder assembly.

      Tip:

      Tape the screwdriver tip before use.

      Note:

      Do not damage the inner surface or piston seal groove of the cylinder.

  4. Click here

    REMOVE REAR DISC BRAKE BLEEDER PLUG CAP

  5. Click here

    REMOVE REAR DISC BRAKE BLEEDER PLUG