FRONT SPEED SENSOR REMOVAL

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.


  1. REMOVE FRONT WHEEL

  2. REMOVE FRONT FENDER LINER LH


    1. Partially remove the front fender liner.

      Tech Tips

      It is not necessary to fully remove the fender liner. Partially remove it so that the speed sensor connector can be disconnected in a later step.

  3. REMOVE FRONT SPEED SENSOR LH


    1. A01IU3W

      Detach the connector clip.

    2. Disconnect the connector.

    3. A01ISUZ

      Detach the sensor clip and remove the bolt and sensor clamp.

    4. A01IPM9

      Detach the sensor clip and remove the bolt and sensor clamp.

    5. A01IUGG

      Remove the bolt and front speed sensor from the knuckle.

      Note

      Keep the sensor tip and sensor installation hole free from foreign matter.