BRAKE ACTUATOR (w/ VSC) REASSEMBLY


  1. INSTALL BRAKE ACTUATOR BRACKET CUSHION


    1. Install the 3 brake actuator bracket cushions to the brake actuator bracket.

  2. INSTALL BRAKE ACTUATOR CASE COLLAR


    1. Install the 3 brake actuator case collars to the brake actuator bracket cushions.

  3. INSTALL BRAKE ACTUATOR BRACKET ASSEMBLY


    1. Install the brake actuator bracket to the brake actuator with the bolt and 2 new nuts. Tighten the 2 nuts and bolt uniformly in alphabetical order.

      A01ISJAE02
      Text in Illustration
      *A except CVT *B for CVT
      Torque:
      for bolt
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }
      for nut
      7.5 N*m  { 76 kgf*cm, 66 in.*lbf }

      Note

      Do not remove the hole plugs before installing a new brake actuator because the brake actuator is filled with brake fluid.