Click here

MANIFOLD ABSOLUTE PRESSURE SENSOR REMOVAL

Click here
Click here Click here
  1. Click here

    REMOVE NO. 1 ENGINE COVER


    1. A01INMI

      Hold the rear of the cover and slowly raise it to detach the clip on the rear of the cover. Continue to raise the cover to detach the 3 clips on the front and side of the cover and remove the cover.

      Note:

      Attempting to disengage both front and rear clips at the same time may cause the cover to break.

  2. Click here

    REMOVE DIESEL TURBO PRESSURE SENSOR


    1. A01IQT8

      Disconnect the vacuum hose.

    2. Disconnect the sensor connector.

    3. Remove the bolt and sensor.