Click here

INTAKE AIR TEMPERATURE SENSOR INSTALLATION

Click here
Click here Click here
  1. Click here

    INSTALL INTAKE AIR TEMPERATURE SENSOR


    1. A01ISA8

      Install a new gasket to the sensor.

    2. Using a 22 mm ball joint lock nut wrench, install the sensor.

      34 N*m 350 kgf*cm 25 ft.*lbf
      Note:

      Use the formula to calculate special torque values for situations where a ball joint lock nut wrench is combined with a torque wrench (Click here).

    3. Connect the sensor connector.

  2. Click here

    INSTALL FRONT LOWER BUMPER ABSORBER


    1. A01ISEU

      Insert the 2 hooks of the front lower bumper absorber into the installation holes on the body to install the front lower bumper absorber.

    2. Install the 4 bolts and 4 screws.

    3. A01IT8Z

      Install the 2 clips.

  3. Click here

    INSTALL NO. 1 ENGINE UNDER COVER


    1. A01IUIX

      Install the No. 1 engine under cover with the 10 clips and 6 bolts.