INTAKE AIR TEMPERATURE SENSOR INSPECTION


  1. INSPECT INTAKE AIR TEMPERATURE SENSOR


    1. Partially immerse the sensor in water and warm up the water.

    2. Measure the resistance according to the value(s) in the table below.

      A01IODEE03
      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2 20°C (68°F) 2.21 to 2.65 kΩ
      1 - 2 60°C (140°F) 0.54 to 0.62 kΩ

      Note

      When checking the sensor in water, keep the terminals dry. After the check, wipe the sensor dry.

      If the result is not as specified, replace the intake air temperature sensor.