CRANKSHAFT POSITION SENSOR INSTALLATION


  1. INSTALL CRANKSHAFT POSITION SENSOR


    1. Apply a light coat of engine oil to the O-ring of the crankshaft position sensor.

    2. Install the crankshaft position sensor with the bolt.

      Torque:
      8.8 N*m  { 90 kgf*cm, 78 in.*lbf }
      A01ITO5E01
      Text in Illustration
      *A for CCo *B for DPF
      *1 Protrusion - -

    3. Install the crankshaft position sensor wire harness with the bolt and clip.

      Torque:
      8.8 N*m  { 90 kgf*cm, 78 in.*lbf }

      Note

      Make sure the crankshaft position sensor wire harness is installed in the position shown in the illustration.

    4. Connect the crankshaft position sensor connector.

  2. INSTALL GENERATOR ASSEMBLY

    Click here