ENGINE OIL TEMPERATURE SENSOR REMOVAL


  1. REMOVE FRONT WHEEL RH

  2. REMOVE REAR ENGINE UNDER COVER RH


    1. A01IP88

      Remove the 5 clips and under cover RH.

  3. REMOVE ENGINE OIL TEMPERATURE SENSOR


    1. A01ISLC

      Disconnect the engine oil temperature sensor connector.

    2. Using a 19 mm deep socket wrench, remove the engine oil temperature sensor from the timing chain cover sub-assembly.

      Note

      If an engine oil temperature sensor has been struck or dropped, replace it.

    3. Remove the gasket from the engine oil temperature sensor.