Click here

CAMSHAFT POSITION SENSOR INSTALLATION

Click here
Click here Click here
  1. Click here

    INSTALL CAMSHAFT POSITION SENSOR (for Intake Side)


    1. A01ISBH

      Apply a light coat of engine oil to the O-ring of the sensor.

    2. A01IPN3

      Install the sensor with the bolt.

      10 N*m 102 kgf*cm 7 ft.*lbf
      Note:

      Make sure that the O-ring is not cracked or does not jump out of position during installation.

    3. Connect the sensor connector.

  2. Click here

    INSTALL CAMSHAFT POSITION SENSOR (for Exhaust Side)


    1. A01ISBH

      Apply a light coat of engine oil to the O-ring of the sensor.

    2. A01INR1

      Install the sensor with the bolt.

      10 N*m 102 kgf*cm 7 ft.*lbf
      Note:

      Make sure that the O-ring is not cracked or does not jump out of position during installation.

    3. Connect the sensor connector.

  3. Click here

    INSTALL NO. 2 CYLINDER HEAD COVER


    1. A01IRS7

      Attach the 4 clips to install the cover.

      Note:

      • Be sure to attach the clips securely.

      • Do not apply excessive force or hit the cover to attach the clips. This may cause the cover to break.