KNOCK SENSOR INSTALLATION

Tech Tips

Perform "Inspection After Repairs" after replacing the knock sensor Click here.


  1. INSTALL KNOCK SENSOR


    1. A01IRGRE02

      Install the knock sensor with the bolt.

      Torque:
      21 N*m  { 214 kgf*cm, 15 ft.*lbf }

      Note

      Make sure that the knock sensor is in the correct position.

      Tech Tips

      Perform "Inspection After Repairs" after replacing the knock sensor Click here.

    2. A01ITG3

      Connect the knock sensor connector.

  2. INSTALL INTAKE MANIFOLD


    1. Install the intake manifold Click here.