CAMSHAFT POSITION SENSOR INSTALLATION


  1. INSTALL CAMSHAFT POSITION SENSOR (for Intake Side)


    1. A01ISBH

      Apply a light coat of engine oil to the O-ring of the sensor.

    2. A01IPN3

      Install the sensor with the bolt.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

      Note

      Make sure that the O-ring is not cracked or does not jump out of position during installation.

    3. Connect the sensor connector.

  2. INSTALL CAMSHAFT POSITION SENSOR (for Exhaust Side)


    1. A01ISBH

      Apply a light coat of engine oil to the O-ring of the sensor.

    2. A01INR1

      Install the sensor with the bolt.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

      Note

      Make sure that the O-ring is not cracked or does not jump out of position during installation.

    3. Connect the sensor connector.

  3. INSTALL NO. 2 CYLINDER HEAD COVER


    1. A01IRS7

      Attach the 4 clips to install the cover.

      Note


      • Be sure to attach the clips securely.

      • Do not apply excessive force or hit the cover to attach the clips. This may cause the cover to break.