AIR FUEL RATIO SENSOR INSTALLATION

Tech Tips

Perform "Inspection After Repairs" after replacing the air fuel ratio sensor Click here.


  1. INSTALL AIR FUEL RATIO SENSOR


    1. A01ISZEE01

      Using SST, install the sensor to the exhaust manifold.

      SST
      09224-00010
      Torque:
      without SST
      44 N*m  { 449 kgf*cm, 32 ft.*lbf }
      with SST
      40 N*m  { 408 kgf*cm, 30 ft.*lbf }

      Note

      Do not damage the sensor.

      Tech Tips


      • Use a torque wrench with a fulcrum length of 300 mm (11.8 in.).

      • Perform "Inspection After Repairs" after replacing the air fuel ratio sensor Click here.

    2. A01IQFV

      Connect the sensor connector and clamp.

  2. INSTALL NO. 2 CYLINDER HEAD COVER


    1. A01IRS7

      Attach the 4 clips to install the cover.

      Note


      • Be sure to attach the clips securely.

      • Do not apply excessive force or hit the cover to attach the clips. This may cause the cover to break.

  3. INSTALL OUTER COWL TOP PANEL


    1. A01IOGQE02
      Text in Illustration
      *A for LHD
      *B for RHD

      Install the outer cowl top panel with the 9 bolts.

      Torque:
      8.8 N*m  { 90 kgf*cm, 78 in.*lbf }

    2. Connect the connector clamp.

  4. INSTALL FRONT WIPER MOTOR AND LINK


    1. Install the front wiper motor and link Click here.