Click here

AIR FUEL RATIO SENSOR INSTALLATION

Click here
Click here Click here
  1. Click here

    INSTALL AIR FUEL RATIO SENSOR


    1. A01ISZEE01

      Using SST, install the sensor to the exhaust manifold.

      09224-00010
      without SST
      44 N*m 449 kgf*cm 32 ft.*lbf
      with SST
      40 N*m 408 kgf*cm 30 ft.*lbf
      Tip:

      Use a torque wrench with a fulcrum length of 300 mm (11.8 in.).

      Note:

      Do not damage the sensor.

    2. A01IQFV

      Connect the sensor connector and clamp.

  2. Click here

    INSTALL NO. 2 CYLINDER HEAD COVER


    1. A01IRS7

      Attach the 4 clips to install the cover.

      Note:

      • Be sure to attach the clips securely.

      • Do not apply excessive force or hit the cover to attach the clips. This may cause the cover to break.

  3. Click here

    INSTALL OUTER COWL TOP PANEL


    1. Install the outer cowl top panel with the 9 bolts.

      8.8 N*m 90 kgf*cm 78 in.*lbf

    2. Connect the connector clamp.

  4. Click here

    INSTALL FRONT WIPER MOTOR AND LINK


    1. Install the front wiper motor and link (Click here).