Click here

CAMSHAFT OIL CONTROL VALVE REMOVAL

Click here
Click here Click here
  1. Click here

    REMOVE NO. 2 CYLINDER HEAD COVER


    1. A01IRS7

      Hold the rear of the cover and raise it to detach the 2 clips on the rear of the cover. Continue to raise the cover to detach the 2 clips on the front of the cover and remove the cover.

      Note:

      Attempting to detach both front and rear clips at the same time may cause the cover to break.

  2. Click here

    REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Intake Side)


    1. A01IQJ7E01

      Disconnect the oil control valve connector.

    2. Remove the bolt and oil control valve.

    3. Remove the O-ring from the oil control valve.

  3. Click here

    REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Exhaust Side)


    1. A01IT2WE01

      Disconnect the oil control valve connector.

    2. Remove the bolt, wire harness bracket and oil control valve.

    3. Remove the O-ring from the oil control valve.