Click here

CAMSHAFT POSITION SENSOR REMOVAL

Click here
Click here Click here
  1. Click here

    REMOVE NO. 2 CYLINDER HEAD COVER


    1. A01IRS7

      Hold the rear of the cover and raise it to detach the 2 clips on the rear of the cover. Continue to raise the cover to detach the 2 clips on the front of the cover and remove the cover.

      Note:

      Attempting to detach both front and rear clips at the same time may cause the cover to break.

  2. Click here

    REMOVE CAMSHAFT POSITION SENSOR (for Intake Side)


    1. A01IPN3

      Disconnect the sensor connector.

    2. Remove the bolt and sensor.

  3. Click here

    REMOVE CAMSHAFT POSITION SENSOR (for Exhaust Side)


    1. A01INR1

      Disconnect the sensor connector.

    2. Remove the bolt and sensor.