ROOF DRIP SIDE FINISH MOULDING REMOVAL


  1. REMOVE REAR ROOF DRIP SIDE MOULDING COVER (w/o Roof Rack)


    1. A01NJXNE01

      Disengage the clip and claw, and remove the rear roof drip side finish moulding joint cover as shown in the illustration.

  2. REMOVE FRONT ROOF DRIP SIDE MOULDING COVER (w/o Roof Rack)

    Tech Tips

    Use the same procedure for the front side and rear side.

  3. REMOVE FRONT ROOF RACK LEG COVER (w/ Roof Rack)


    1. A01NIQ7E01
      Text in Illustration
      *1 Protective Tape

      Put protective tape around the front roof rack leg cover.

    2. Using a moulding remover, disengage the 3 claws.

      A01NIUD

      Note

      Be careful not to damage the claws.

    3. Disengage the guide and remove the front roof rack leg cover.

  4. REMOVE REAR ROOF RACK LEG COVER (w/ Roof Rack)


    1. A01NKTUE01
      Text in Illustration
      *1 Protective Tape

      Put protective tape around the rear roof rack leg cover.

    2. Using a moulding remover, disengage the 3 claws.

      A01NL0I

      Note

      Be careful not to damage the claws.

    3. Disengage the guide and remove the rear roof rack leg cover.

  5. REMOVE ROOF RACK ASSEMBLY (w/ Roof Rack)


    1. Remove the 4 bolts and roof rack assembly.

      A01NLQG

  6. REMOVE ROOF CARRIER SEAL (w/ Roof Rack)


    1. A01NJEK

      Remove the roof carrier seal.

      Tech Tips

      Use the same procedure for the front side and rear side.

  7. REMOVE ROOF DRIP SIDE FINISH MOULDING (except Glass Roof)


    1. A01NIT7

      Disengage the clip and remove the roof drip side finish moulding.

      Note


      • Do not remove the clip.

      • If the clip is damaged or falls out, replace it with a new one.

  8. REMOVE CENTER ROOF DRIP SIDE FINISH MOULDING (except Glass Roof)


    1. A01NN80

      Disengage the clip and remove the center roof drip side finish moulding.

      Note


      • Do not remove the clip.

      • If the clip is damaged or falls out, replace it with a new one.

  9. REMOVE REAR ROOF DRIP SIDE FINISH MOULDING


    1. A01NMM7

      Using a moulding remover, disengage the clip and remove the rear roof drip side finish moulding.

      Note


      • Do not remove the clip.

      • If the clip is damaged or falls out, replace it with a new one.

  10. REMOVE ROOF DRIP SIDE FINISH MOULDING (for Glass Roof)


    1. A01NM3I

      Using a moulding remover, disengage the clips and remove the roof drip side finish moulding.

      Note


      • Do not remove the clip.

      • If the clip is damaged or falls out, replace it with a new one.

  11. REMOVE REAR ROOF RACK BRACKET (w/o Roof Rack)


    1. A01NIFS

      Remove the 2 bolts and rear roof rack bracket.

  12. REMOVE FRONT ROOF RACK BRACKET (w/o Roof Rack)

    Tech Tips

    Use the same procedure for the front side and rear side.