Click here

FRONT BUMPER (for Sport Package) INSTALLATION

Click here
Click here Click here
  1. Click here

    INSTALL FRONT BUMPER ASSEMBLY


    1. Connect each connector.

    2. Connect the headlight cleaner hose. (w/ Headlight Cleaner System)

    3. A01NKGU

      Engage the claw to install the front bumper assembly.

    4. A01NIQR

      Engage the 2 claws.

    5. A01NIMG

      Engage the 3 claws.

      Tip:

      Use the same procedure for the RH side and LH side.

    6. Install the 10 clips.

    7. Install the 2 screws.

      7.5 N*m 77 kgf*cm 66 in.*lbf

    8. Install the front bumper seal bracket.

      Tip:

      Use the same procedure for the RH side and LH side.

    9. Install the screw.

      7.5 N*m 77 kgf*cm 66 in.*lbf
      Tip:

      Use the same procedure for the RH side and LH side.

    10. A01NJE5E01

      Install the 2 pin hold clips.

      Table 1. Text in Illustration
      *a Correct
      *b Incorrect
      Note:

      Insert the pin hold clip with the slot aligned vertically. Do not rotate the clip after inserting it. After installation, confirm that the slot is aligned vertically.

      Tip:

      Use the same procedure for the RH side and LH side.

  2. Click here

    INSTALL HOOD CENTER CUSHION


    1. Install the 2 hood center cushions.

  3. Click here

    INSTALL COOL AIR INTAKE DUCT SEAL


    1. Install the cool air intake duct seal with the 6 clips.

  4. Click here

    INSTALL ENGINE ROOM SIDE COVER LH


    1. Engage the guide.

    2. Install the engine room side cover LH with the 4 clips.

  5. Click here

    INSTALL ENGINE ROOM SIDE COVER


    1. Install the engine room side cover with the 4 clips.

  6. Click here

    ADD WASHER FLUID (w/ Headlight Cleaner System)


    1. Add washer fluid to the washer jar.

  7. Click here

    ADJUST FOG LIGHT AIMING

    (Click here)