FRONT BUMPER (for Sport Package) REMOVAL


  1. REMOVE ENGINE ROOM SIDE COVER


    1. A01NKI4

      Remove the 4 clips and engine room side cover.

  2. REMOVE ENGINE ROOM SIDE COVER LH


    1. A01NJLS

      Remove the 4 clips.

    2. Disengage the guide and remove the engine room side cover LH.

  3. REMOVE COOL AIR INTAKE DUCT SEAL


    1. A01NJMT

      Remove the 6 clips and cool air intake duct seal.

  4. REMOVE HOOD CENTER CUSHION


    1. A01NJG7

      Remove the 2 hood center cushions.

  5. REMOVE FRONT BUMPER ASSEMBLY


    1. A01NKUCE01
      Text in Illustration
      *1 Protective Tape

      Put protective tape around the front bumper assembly.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    2. A01NLISE01

      Using a screwdriver, turn the pins 90 degrees and remove the 2 pin hold clips.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    3. A01NI9T

      Remove the screw and front bumper seal bracket.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    4. A01NJOA

      Remove the 2 screws.

    5. Using a clip remover, remove the 10 clips.

    6. A01NI4C

      Disengage the 3 claws as shown in the illustration.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    7. A01NIFH

      Using a moulding remover, disengage the claw as shown in the illustration.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    8. A01NMPF

      Disengage the claw and disconnect the front bumper assembly as shown in the illustration.

    9. Disconnect the headlight cleaner hose. (w/ Headlight Cleaner System)

      Note

      Prepare a drain pan or a piece of cloth in case washer fluid leaks.

    10. Disconnect each connector and remove the front bumper assembly.