Click here

RELAY ON-VEHICLE INSPECTION

Click here
Click here Click here
  1. Click here

    INSPECT REAR FOG LIGHT RELAY (RR FOG)


    1. A01NMT5E86

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      3 - 5 Voltage is not applied between terminals 1 and 2 10 kΩ or higher
      3 - 5 Voltage is applied between terminals 1 and 2 Below 1 Ω

      If the result is not as specified, replace the rear fog light relay.

  2. Click here

    INSPECT BACK UP LIGHT RELAY (BK/UP LP)


    1. A01NMT5E86

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      3 - 5 Voltage is not applied between terminals 1 and 2 10 kΩ or higher
      3 - 5 Voltage is applied between terminals 1 and 2 Below 1 Ω

      If the result is not as specified, replace the back up light relay.

  3. Click here

    INSPECT DAYTIME RUNNING LIGHT RELAY (DRL)


    1. A01NMT5E86

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      3 - 5 Voltage is not applied between terminals 1 and 2 10 kΩ or higher
      3 - 5 Voltage is applied between terminals 1 and 2 Below 1 Ω

      If the result is not as specified, replace the daytime running light relay.