STOP LIGHT CONTROL RELAY REMOVAL


  1. REMOVE DRIVER SIDE KNEE AIRBAG ASSEMBLY (for LHD)

    Click here

  2. REMOVE FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY (for RHD)

    Click here

  3. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY (for RHD)


    1. A01NJ44

      Remove the 5 screws <F>.

    2. A01NJQM

      Disengage the claw, 4 clips and guide.

    3. Disconnect each connector and remove the glove compartment door assembly.

  4. REMOVE INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY (for LHD)


    1. A01NISQ

      Disconnect the 4 connectors.

    2. A01NL5RE02

      Disengage the 2 claws as shown in the illustration and disconnect the 2 connectors (A).

    3. Disconnect the 4 connectors (B).

    4. A01NKVN

      Remove the 2 nuts.

    5. A01NIZ0

      Disengage the claw as shown in the illustration and disconnect the connector.

    6. A01NJJS

      Disengage the 2 claws and release the connector lock as shown in the illustration.

    7. A01NI7C

      Disengage the claw as shown in the illustration and disconnect the connector and remove the instrument panel junction block assembly.

  5. REMOVE INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY (for RHD)


    1. A01NJ8Z

      Disconnect the 3 connectors.

    2. A01NK4YE02

      Disengage the 2 claws as shown in the illustration and disconnect the 2 connectors (A).

    3. Disconnect the connector (B).

    4. A01NJCX

      Remove the bolt and nut.

    5. A01NJGF

      Disengage the claw as shown in the illustration and disconnect the connector.

    6. A01NJJS

      Disengage the 2 claws and release the connector lock as shown in the illustration.

    7. A01NI7C

      Disengage the claw as shown in the illustration and disconnect the connector and remove the instrument panel junction block assembly.

  6. REMOVE STOP LIGHT CONTROL RELAY ASSEMBLY


    1. A01NKOH

      Disengage the clamp.

    2. Disconnect the connector and remove the stop light control relay assembly.