AFS ECU INSTALLATION


  1. INSTALL AFS ECU (for LHD)


    1. A01NNEU

      Engage the guide.

    2. Install the AFS ECU with the nut.

    3. Connect the connector.

  2. INSTALL AFS ECU (for RHD)


    1. A01NLQD

      Engage the guide.

    2. Install the AFS ECU with the nut.

    3. Connect the connector.

  3. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for LHD)


    1. Engage each clamp.

    2. Connect each connector.

    3. A01NN6J

      Engage the claw and 2 guides.

    4. Install the No. 1 instrument panel under cover sub- assembly with the 2 screws <D>.

  4. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for RHD)


    1. Engage each clamp.

    2. Connect each connector.

    3. A01NJ6F

      Engage the claw and 2 guides.

    4. Install the No. 1 instrument panel under cover sub- assembly with the 2 screws <D>.

  5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  6. INSTALL REAR DECK FLOOR BOX


    1. A01NIBL

      Install the rear deck floor box with the 3 clips.

  7. CHECK VEHICLE HEIGHT (w/ Air Suspension)


    1. Change the height control switch from the "NORM" position to the "HIGH" position and back to the "NORM" position.

    2. Measure the vehicle height Click here.

  8. ADJUST VEHICLE HEIGHT (w/ Air Suspension)


    1. Adjust the vehicle height Click here.

  9. REGISTER VEHICLE INFORMATION

    Click here

  10. HEIGHT CONTROL SENSOR SIGNAL INITIALIZATION (w/o Air Suspension)

    Click here

  11. ADJUST HEADLIGHT AIMING (except LED Headlight)

    Click here

  12. ADJUST HEADLIGHT AIMING (for LED Headlight)

    Click here