HEIGHT CONTROL SENSOR REMOVAL

w/ Air Suspension:

CAUTION:

Be sure to read Precaution thoroughly before servicing Click here.


  1. PRECAUTION

    Note

    After turning the power switch off, waiting time may be required before disconnecting the cable from the auxiliary battery negative (-) terminal. Therefore, make sure to read the disconnecting the cable from the auxiliary battery negative (-) terminal notices before proceeding with work Click here.

  2. REMOVE REAR DECK FLOOR BOX


    1. A01NIBL

      Remove the 3 clips and the rear deck floor box.

  3. DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  4. REMOVE REAR WHEEL

  5. REMOVE REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY


    1. A01NIWZ

      Disconnect the connector.

    2. Remove the bolt and disengage the guide.

    3. A01NN7W

      Remove the bolt and disengage the guide.

    4. Remove the 2 nuts and rear height control sensor sub-assembly.

      Note

      Do not drop the rear height control sensor sub-assembly. If it is dropped, replace it with a new one.