NAME PLATE INSTALLATION

Tech Tips

When installing name plates, heat the vehicle body and name plates using a heat light.

Heating Temperature
Item Temperature
Vehicle Body 40 to 60°C (104 to 140°F)
Name Plate 20 to 30°C (68 to 86°F)

Note

Do not heat the vehicle body or name plates excessively.


  1. INSTALL NO. 1 BACK DOOR NAME PLATE


    1. Clean the vehicle body surface.


      1. Using a heat light, heat the vehicle body surface.

      2. Remove any double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Install a new No. 1 back door name plate.


      1. Using a heat light, heat the vehicle body and the No. 1 back door name plate.

      2. Remove the release paper from the No. 1 back door name plate.

        Tech Tips

        After removing the release paper, keep the exposed adhesive free from foreign matter.

      3. Install the No. 1 back door name plate as shown in the illustration.

        A01NJKRE01
        Text in Illustration
        *1 Location Pin - -

  2. INSTALL NO. 2 BACK DOOR NAME PLATE


    1. Clean the vehicle body surface.


      1. Using a heat light, heat the vehicle body surface.

      2. Remove any double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Install a new No. 2 back door name plate.


      1. Using a heat light, heat the vehicle body and the No. 2 back door name plate.

      2. Remove the release paper from the No. 2 back door name plate.

        Tech Tips

        After removing the release paper, keep the exposed adhesive free from foreign matter.

      3. Install the No. 2 back door name plate as shown in the illustration.

        A01NLI0E01
        Standard Measurement
        Dimension Measurement
        A 41.7 mm (1.642 in.)
        B 54.5 mm (2.146 in.)
        C 66.7 mm (2.626 in.)

  3. INSTALL NO. 3 BACK DOOR NAME PLATE


    1. Clean the vehicle body surface.


      1. Using a heat light, heat the vehicle body surface.

      2. Remove any double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Install a new No. 3 back door name plate.


      1. Using a heat light, heat the vehicle body and the No. 3 back door name plate.

      2. Remove the release paper from the No. 3 back door name plate.

        Tech Tips

        After removing the release paper, keep the exposed adhesive free from foreign matter.

      3. Install the No. 3 back door name plate as shown in the illustration.

        A01NLCYE01
        Standard Measurement
        Dimension Measurement
        A 66.7 mm (2.626 in.)
        B 32.5 mm (1.280 in.)
        C 51.2 mm (2.016 in.)

  4. INSTALL NO. 2 FRONT FENDER NAME PLATE


    1. Clean the vehicle body surface.


      1. Using a heat light, heat the vehicle body surface.

      2. Remove any double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Install a new No. 2 front fender name plate.


      1. Using a heat light, heat the vehicle body and the No. 2 front fender name plate.

      2. Remove the release paper from the No. 2 front fender name plate.

        Tech Tips

        After removing the release paper, keep the exposed adhesive free from foreign matter.

      3. Install the No. 2 front fender name plate as shown in the illustration.

        A01NJSGE01
        Standard Measurement
        Dimension Measurement
        A 57.5 mm (2.26 in.)
        B 109.5 mm (4.31 in.)
        C 87.7 mm (3.45 in.)
        D 139 mm (5.47 in.)

  5. INSTALL NO. 1 FRONT FENDER NAME PLATE


    1. Clean the vehicle body surface.


      1. Using a heat light, heat the vehicle body surface.

      2. Remove any double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Install a new No. 1 front fender name plate.


      1. Using a heat light, heat the vehicle body and the No. 1 front fender name plate.

      2. Remove the release paper from the No. 1 front fender name plate.

        Tech Tips

        After removing the release paper, keep the exposed adhesive free from foreign matter.

      3. Install the No. 1 front fender name plate as shown in the illustration.

        A01NMHLE01
        Standard Measurement
        Dimension Measurement
        A 59.2 mm (2.33 in.)
        B 111.2 mm (4.38 in.)
        C 86.0 mm (3.39 in.)
        D 137 mm (5.39 in.)