HIGH MOUNTED STOP LIGHT ASSEMBLY REMOVAL


  1. REMOVE UPPER BACK WINDOW PANEL TRIM


    1. A01NMCGE01
      Text in Illustration
      *1 2-piece Type Clip

      Disengage the 7 clips and 6 claws, and remove the upper back window panel trim.

      Tech Tips

      If any clips remain on the back door panel after the upper back window panel trim is removed, remove the clips and install them to the upper back window panel trim.

  2. REMOVE REAR SPOILER SUB-ASSEMBLY


    1. Disconnect each connector.

    2. A01NLW9

      Remove the 2 hole plugs.

    3. Remove the 5 nuts.

    4. A01NKCQ

      Disengage the clip and 2 pins to remove the rear spoiler sub-assembly.

    5. Remove the clip and 2 pins.

  3. REMOVE REAR NO. 1 SPOILER COVER


    1. A01NI37E01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver wrapped with protective tape, disengage the 4 claws and remove the 2 rear No. 1 spoiler covers.

  4. REMOVE CENTER STOP LIGHT ASSEMBLY


    1. A01NLJ3

      Remove the 2 screws.

    2. Disconnect the connector and remove the center stop light assembly.