REAR COMBINATION LIGHT ASSEMBLY INSTALLATION


  1. INSTALL REAR COMBINATION LIGHT ASSEMBLY


    1. A01NLF2E01
      Text in Illustration
      *1 Guide
      *2 Pin

      Engage the guide and pin, and install the rear combination light assembly as shown in the illustration.

    2. A01NIZT

      Install the 3 nuts.

      Torque:
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

    3. Connect each connector.

  2. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH (for LH Side)


    1. Connect each connector.

    2. Engage the 2 clips and the 5 claws.

    3. Install the deck trim side panel assembly LH with the 2 bolts and 4 clips.

      A01NLMP

  3. INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH (for RH Side)


    1. Connect the connector.

    2. Engage the 2 clips and the 5 claws.

    3. Install the deck trim side panel assembly RH with the 2 bolts and 5 clips.

      A01NL5Y

  4. INSTALL HEIGHT CONTROL SWITCH (for RH Side)


    1. w/ Air Suspension:


      1. Install the height control switch Click here.

  5. INSTALL RECLINING REMOTE CONTROL BEZEL


    1. A01NLC2

      Engage the 4 claws and install the reclining remote control bezel LH.

  6. INSTALL ROPE HOOK ASSEMBLY


    1. A01NJ4O

      Install the 2 rope hook assemblies with the 2 bolts.

    2. Engage the 2 claws.

  7. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK (for LH Side)


    1. A01NJN3

      Install the No. 1 luggage compartment trim hook as shown in the illustration.

  8. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK (for RH Side)


    1. A01NL62

      Install the No. 1 luggage compartment trim hook as shown in the illustration.

  9. INSTALL REAR SEAT SIDE COVER


    1. A01NJHB

      Engage the 2 claws and 3 clips.

    2. Install the rear seat side cover LH with the 2 clips.

  10. INSTALL REAR FLOOR FINISH SIDE PLATE


    1. A01NLJE

      Engage the guide.

    2. Engage the claw and 2 clips.

    3. Install the rear floor finish side plate LH with the clip.

  11. INSTALL REAR FLOOR FINISH PLATE


    1. A01NMPW

      Engage the 6 clips, 2 claws and 2 guides, and install the rear floor finish plate.

  12. INSTALL REAR DOOR SCUFF PLATE


    1. A01NIFR

      Engage the 3 clips, guide and 6 claws, and install the rear door scuff plate LH.

  13. INSTALL REAR SEAT ASSEMBLY LH (for LH Side)

    Tech Tips

    Refer to the procedure from Install Rear Seat Assembly LH Click here.

  14. INSTALL REAR SEAT ASSEMBLY RH (for RH Side)

    Tech Tips

    Refer to the procedure from Install Rear Seat Assembly RH Click here.

  15. INSTALL FRONT DECK FLOOR BOX (for LH Side)


    1. A01NN39

      Install the front deck floor box with the clip.

  16. INSTALL DECK SIDE TRIM BOX LH (for LH Side)


    1. for Compact Spare Tire:


      1. Install the deck side trim box LH Click here.

  17. INSTALL DECK SIDE TRIM BOX LH (for LH Side)


    1. for Full Size Spare Tire:


      1. Install the deck side trim box LH Click here.

  18. INSTALL NO. 4 REAR FLOOR BOARD (for LH Side)


    1. for Compact Spare Tire:


      1. Install the No. 4 rear floor board Click here.

  19. INSTALL NO. 4 REAR FLOOR BOARD (for LH Side)


    1. for Full Size Spare Tire:


      1. Install the No. 4 rear floor board Click here.

  20. INSTALL DECK SIDE TRIM BOX RH (for RH Side)


    1. for Compact Spare Tire:


      1. Install the deck side trim box RH Click here.

  21. INSTALL DECK SIDE TRIM BOX RH (for RH Side)


    1. for Full Size Spare Tire:


      1. Install the deck side trim box RH Click here.

  22. INSTALL NO. 3 REAR FLOOR BOARD (for RH Side)


    1. for Compact Spare Tire:


      1. Install the No. 3 rear floor board Click here.

  23. INSTALL NO. 3 REAR FLOOR BOARD (for RH Side)


    1. for Full Size Spare Tire:


      1. Install the No. 3 rear floor board Click here.

  24. INSTALL SPARE WHEEL COVER ASSEMBLY (for RH Side)


    1. for Compact Spare Tire:


      1. Install the spare wheel cover assembly Click here.

  25. INSTALL DECK BOARD SUB-ASSEMBLY


    1. for Compact Spare Tire:


      1. A01NM7R

        Install the deck board sub-assembly with the 2 bolts.

    2. for Full Size Spare Tire:


      1. A01NM92

        Install the deck board sub-assembly with the 2 bolts.

    3. A01NIMA

      Engage the 3 fasteners as shown in the illustration.

  26. INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)


    1. Install the tonneau cover assembly.

  27. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (for RH Side)


    1. w/ Air Suspension:

      Note

      When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  28. INSTALL REAR DECK FLOOR BOX


    1. A01NIBL

      Install the rear deck floor box with the 3 clips.

  29. INSPECT SUSPENSION CONTROL SYSTEM (for RH Side)


    1. w/ Air Suspension:


      1. Inspect the suspension control system Click here.