REAR COMBINATION LIGHT ASSEMBLY DISASSEMBLY


  1. REMOVE TAIL LIGHT BULB


    1. A01NMIB

      Turn the rear combination light socket and wire sub-assembly with the tail light bulb in the direction indicated by the arrow shown in the illustration, and disconnect them as a unit.

    2. Remove the tail light bulb from the rear combination light socket and wire sub-assembly.

  2. REMOVE REAR TURN SIGNAL LIGHT BULB


    1. A01NKKN

      Turn the rear combination light socket and wire sub-assembly with the rear turn signal light bulb in the direction indicated by the arrow shown in the illustration, and remove them as a unit.

    2. Remove the rear turn signal light bulb from the rear combination light socket and wire sub-assembly.

  3. REMOVE REAR COMBINATION LIGHT GASKET


    1. A01NI9Y

      Remove the rear combination light gasket.

      Note


      • Be sure to remove all the traces of the old gasket from the body.

      • Do not reuse the removed gasket. Be sure to install a new rear combination light gasket to prevent water ingress.