SIDE TURN SIGNAL LIGHT ASSEMBLY REMOVAL


  1. REMOVE OUTER MIRROR


    1. A01NJ0PE01

      Push the upper part of the mirror surface and tilt it.

    2. Apply protective tape to the areas shown in the illustration.

    3. Using a moulding remover, disengage the 2 claws at the lower part of the outer rear view mirror.

      Text in Illustration
      *1 Protective Tape
      *2 Moulding Remover
    4. A01NIJUE01

      Push the lower part of the mirror surface and tilt it.

    5. Apply protective tape to the areas shown in the illustration.

    6. Using a moulding remover with its tip wrapped with protective tape, disengage the 2 claws at the upper part of the outer rear view mirror, and separate the outer mirror.

      Text in Illustration
      *1 Protective Tape
      *2 Moulding Remover
    7. A01NMSM

      Disconnect each connector and remove the outer mirror.

  2. REMOVE SIDE TURN SIGNAL LIGHT ASSEMBLY


    1. A01NLOL

      Remove the 4 screws.

    2. A01NLCC

      Disengage the 4 claws and disconnect the outer mirror cover with the side turn signal light assembly.

    3. A01NKQS

      Disconnect the connector and remove the outer mirror cover with the side turn signal light assembly.

    4. A01NLLJ

      Disengage the 2 claws and remove the side turn signal light assembly with the turn signal trim from the outer mirror cover.

    5. A01NJO0

      Disengage the 3 claws and remove the side turn signal light assembly from the turn signal trim.