AUTOMATIC LIGHT CONTROL SENSOR REMOVAL


  1. REMOVE AUTOMATIC LIGHT CONTROL SENSOR


    1. Using moulding remover B, disengage the 11 clips.

      Tech Tips

      Apply protective tape to the areas where the moulding remover B is to be inserted.

    2. Disengage the 7 claws.

      A01NMF4E01
      Text in Illustration
      *1 Moulding Remover B *2 Protective Tape
    3. A01NIE3

      Disengage the 2 claws.

    4. Disconnect the connector and remove the automatic light control sensor.