HEADLIGHT ASSEMBLY (except LED Headlight) DISASSEMBLY


  1. REMOVE NO. 1 HEADLIGHT BULB


    1. A01NJ5J

      Disconnect the connector.

    2. A01NLDP

      Turn the No. 1 headlight bulb in the direction indicated by the arrow shown in the illustration, and remove it.

      Note

      Do not touch the bulb glass.

  2. REMOVE NO. 2 HEADLIGHT BULB (for Halogen Headlight)


    1. A01NJ14

      Turn the No. 2 headlight bulb in the direction indicated by the arrow shown in the illustration, and remove it.

      Note

      Do not touch the bulb glass.

  3. REMOVE HEADLIGHT LIGHT CONTROL ECU SUB-ASSEMBLY (for HID Headlight)


    1. A01NJ1V

      Turn the headlight light control ECU sub-assembly in the direction indicated by the arrow shown in the illustration, and disconnect it.

      Note


      • Do not apply excessive force using a tool.

      • Do not damage the O-ring or allow it to become contaminated with foreign matter. If the O-ring is damaged or contaminated, water may get into the headlight assembly, resulting in a malfunction of the headlight light control ECU sub-assembly.

    2. A01NIEA

      Turn the socket of the headlight light control ECU sub-assembly in the direction indicated by the arrow shown in the illustration, and remove it.

      Note

      Do not pull the headlight light control ECU sub-assembly with the socket connected.

  4. REMOVE DISCHARGE HEADLIGHT BULB (for HID Headlight)


    1. A01NKZ0E01

      Release the set spring as shown in the illustration and remove the discharge headlight bulb.

      Note

      Do not touch the bulb glass.

  5. REMOVE FRONT TURN SIGNAL LIGHT BULB


    1. A01NI5S

      Turn the front turn signal light socket with the front turn signal light bulb in the direction indicated by the arrow shown in the illustration, and remove them as a unit.

    2. Remove the front turn signal light bulb from the front turn signal light socket.

  6. REMOVE FRONT BUMPER BAR REINFORCEMENT


    1. A01NK0P

      Remove the 2 screws.

    2. Disengage the 2 guides and remove the front bumper bar reinforcement.