WASHER LEVEL WARNING SWITCH REMOVAL

REMOVE FRONT FENDER LINER RH

1. 

   Using a screwdriver, turn the pin 90 degrees and remove the 2 pin hold clips.

2. 

   Using a 4 mm hexagon wrench, remove the 4 hexagon screws.

3. 

   Remove the 7 clips and 6 screws.

   Table 1. Text in Illustration

   *1

   Grommet

4. Remove the 3 grommets and front fender liner RH.

   Tip:

   The grommets need to be replaced with new ones because they will break when they are removed.

DRAIN WINDSHIELD WASHER FLUID

1. 

   Disconnect the washer hose from the windshield washer motor and pump assembly, and drain the washer fluid.

   Tip:

   Use a container to collect the washer fluid.