Click here

WASHER NOZZLE (for Front Side) ADJUSTMENT

Click here
Click here Click here
  1. Click here

    REMOVE WASHER NOZZLE SUB-ASSEMBLY


    1. A01NLX8E02

      Using a screwdriver, disengage the 2 claws and separate the washer nozzle sub-assembly as shown in the illustration.

      Table 1. Text in Illustration
      *1 Protective Tape
      Note:

      Be careful not to damage the windshield.

      Tip:

      Tape the screwdriver tip before use.

    2. A01NMQ6

      Remove the washer nozzle sub-assembly from the washer hose.

      Note:

      Washer nozzles cannot be reused.

  2. Click here

    ADJUST WASHER NOZZLE SUB-ASSEMBLY


    1. A01NNB6E01

      Select a washer nozzle so that the contact area is within the standard. Replace the washer nozzle with the selected one.

  3. Click here

    INSTALL WASHER NOZZLE SUB-ASSEMBLY


    1. A01NMQ6

      Connect a new washer nozzle sub-assembly to the washer hose.

    2. A01NMP2E01

      Engage the 2 claws and install the washer nozzle sub-assembly as shown in the illustration.