OUTER MIRROR CONTROL ECU INSTALLATION


  1. INSTALL OUTER MIRROR CONTROL ECU ASSEMBLY


    1. A01NJVE

      Install the outer mirror control ECU assembly with the 2 screws.

    2. Connect each connector.

  2. INSTALL FRONT DOOR INNER GLASS WEATHERSTRIP


    1. A01NN7K

      Engage the 4 claws and install the front door inner glass weatherstrip as shown in the illustration.

  3. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY


    1. Install a new front door trim board retainer (green).

    2. A01NKVJ

      Connect the front door lock remote control cable assembly and front door inside locking cable assembly.

    3. Connect each connector.

    4. A01NJJE

      Engage the front door trim board sub-assembly with the 4 claws of the front door inner glass weatherstrip as shown in the illustration.

    5. A01NI5PE01
      Text in Illustration
      *1 Front Door Trim Board Retainer

      Engage the 10 clips, front door trim board retainer and install the front door trim board sub-assembly.

    6. Install the 3 screws.

      Torque:
      (A)
      3.5 N*m  { 36 kgf*cm, 31 in.*lbf }

  4. INSTALL NO. 1 FRONT DOOR STIFFENER CUSHION


    1. A01NLIE

      Install the No. 1 front door stiffener cushion with the screw.

  5. INSTALL COURTESY LIGHT ASSEMBLY


    1. Connect the connector.

    2. A01NMJJE02
      Text in Illustration
      *A for LH Side
      *B for RH Side

      Engage the claw to install the courtesy light assembly.

  6. INSTALL DOOR ARMREST COVER


    1. A01NIHP

      Install the door armrest cover.

  7. INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Driver Side)


    1. A01NL4W

      Connect the connector.

    2. Engage the 2 clips and 5 claws, and install the power window regulator master switch assembly with front door armrest base panel.

  8. INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL


    1. A01NIDE

      Connect the connector.

    2. Engage the 2 clips and 5 claws, and install the power window regulator switch assembly with front door armrest base panel.

  9. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG


    1. A01NIF3

      Engage the 3 claws and install the front door inside handle bezel plug.