OUTER MIRROR CONTROL ECU REMOVAL


  1. REMOVE FRONT DOOR INSIDE HANDLE BEZEL PLUG


    1. A01NLIP

      Using a moulding remover, disengage the 3 claws and remove the front door inside handle bezel plug as shown in the illustration.

  2. REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Driver Side)


    1. A01NL5U

      Using a moulding remover, disengage the 2 clips and 5 claws as shown in the illustration.

    2. Disconnect the connector and remove the power window regulator master switch assembly with front door armrest base panel.

  3. REMOVE POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Front Passenger Side)


    1. A01NMYY

      Using a moulding remover, disengage the 2 clips and 5 claws.

    2. Disconnect the connector and remove the power window regulator switch assembly with front door armrest base panel.

  4. REMOVE DOOR ARMREST COVER


    1. A01NIHP

      Remove the door armrest cover.

  5. REMOVE COURTESY LIGHT ASSEMBLY


    1. A01NL1VE02
      Text in Illustration
      *A for LH Side
      *B for RH Side
      *1 Protective Tape

      Using a screwdriver wrapped with protective tape, disengage the claw.

    2. Disconnect the connector and remove the courtesy light assembly.

  6. REMOVE NO. 1 FRONT DOOR STIFFENER CUSHION


    1. A01NLIE

      Remove the screw and No. 1 front door stiffener cushion.

  7. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY


    1. A01NI5PE02

      Remove the 3 screws.

    2. Using a clip remover, disengage the 10 clips and front door trim board retainer.

      Text in Illustration
      *1 Front Door Trim Board Retainer
    3. A01NLI2

      Pull out the front door trim board sub-assembly in the direction indicated by the arrow as shown in the illustration.

    4. Raise the front door trim board sub-assembly to disengage the 4 claws and remove the front door trim board sub-assembly together with the front door inner glass weatherstrip.

    5. Disconnect each connector.

    6. A01NJ7Y

      Disconnect the front door lock remote control cable assembly and front door inside locking cable assembly.

    7. Remove the front door trim board retainer (green) from the front door trim board sub-assembly.

  8. REMOVE FRONT DOOR INNER GLASS WEATHERSTRIP


    1. A01NK38

      Using a moulding remover, disengage the 4 claws and remove the front door inner glass weatherstrip from the front door trim board sub-assembly as shown in the illustration.

  9. REMOVE OUTER MIRROR CONTROL ECU ASSEMBLY


    1. A01NJVE

      Disconnect each connector.

    2. Remove the 2 screws and the outer mirror control ECU assembly.