REAR POWER OUTLET SOCKET REMOVAL


  1. REMOVE TONNEAU COVER ASSEMBLY


    1. Remove the tonneau cover assembly.

  2. REMOVE DECK BOARD SUB-ASSEMBLY


    1. A01NLRP

      Disengage the 3 fasteners as shown in the illustration.

    2. for Compact Spare Tire:


      1. A01NM7R

        Remove the 2 bolts and remove the deck board sub-assembly.

    3. for Full Size Spare Tire:


      1. A01NM92

        Remove the 2 bolts and remove the deck board sub-assembly.

  3. REMOVE NO. 4 REAR FLOOR BOARD (for Compact Spare Tire)


    1. A01NLSZ

      Disengage the 2 guides and remove the No. 4 rear floor board.

  4. REMOVE NO. 4 REAR FLOOR BOARD (for Full Size Spare Tire)


    1. A01NMV0

      Disengage the 2 guides and remove the No. 4 rear floor board.

  5. REMOVE REAR DECK FLOOR BOX


    1. A01NIBL

      Remove the 3 clips and the rear deck floor box.

  6. REMOVE DECK SIDE TRIM BOX LH (for Compact Spare Tire)


    1. A01NNFE

      Remove the 2 clips and the deck side trim box LH.

  7. REMOVE DECK SIDE TRIM BOX LH (for Full Size Spare Tire)


    1. A01NKYS

      Remove the 3 clips and the deck side trim box LH.

  8. REMOVE FRONT DECK FLOOR BOX


    1. A01NN39

      Remove the clip and the front deck floor box.

  9. REMOVE REAR SEAT ASSEMBLY LH


    1. Remove the rear seat assembly LH Click here.

  10. REMOVE REAR DOOR SCUFF PLATE LH


    1. A01NIFR

      Disengage the 6 claws, 3 clips and guide, and remove the rear door scuff plate LH.

  11. REMOVE REAR FLOOR FINISH PLATE


    1. A01NMPW

      Disengage the 2 claws, 6 clips and 2 guides, and remove the rear floor finish plate.

  12. REMOVE REAR FLOOR FINISH SIDE PLATE LH


    1. A01NLJE

      Remove the clip.

    2. Disengage the claw and 2 clips.

    3. Disengage the guide and remove the rear floor finish side plate LH.

  13. REMOVE REAR SEAT SIDE COVER LH


    1. A01NJHB

      Remove the 2 clips.

    2. Disengage the 2 claws and 3 clips, and remove the rear seat side cover LH.

      Tech Tips

      A part of the clip remains on the vehicle side.

  14. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK LH


    1. A01NIXA

      Remove the No. 1 luggage compartment trim hook as shown in the illustration.

  15. REMOVE ROPE HOOK ASSEMBLY LH


    1. A01NKLEE01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver, disengage the 2 claws.

      Tech Tips

      Tape the screwdriver tip before use.

    2. Remove the 2 bolts and the 2 rope hook assemblies.

  16. REMOVE RECLINING REMOTE CONTROL BEZEL LH


    1. A01NLQBE01

      Using moulding remover A, disengage the 2 bottom claws of the reclining remote control bezel LH.

    2. Lift the reclining remote control bezel LH as shown by the arrow (1) in the illustration.

    3. Turn the reclining remote control bezel LH as shown by the arrow (2) in the illustration, then disengage the 2 upper claws and remove the bezel.

  17. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH


    1. Remove the 2 screws.

    2. Remove the 4 clips.

    3. Disengage the 5 claws and 2 clips.

    4. Disconnect each connector and remove the deck trim side panel assembly LH.

      A01NLMP

  18. REMOVE REAR POWER POINT SOCKET ASSEMBLY


    1. A01NLEIE01

      Using a screwdriver, disengage the claw and remove the rear power point socket assembly.

      Tech Tips

      Tape a screwdriver tip before use.

      Text in Illustration
      *1 Protective Tape

  19. REMOVE REAR POWER OUTLET SOCKET COVER


    1. A01NJ2L

      Disengage the 2 claws and remove the rear power outlet socket cover.