Click here

LUMBAR SUPPORT ADJUSTER ASSEMBLY INSTALLATION

Click here
Click here Click here
  1. Click here

    INSTALL LUMBAR SUPPORT ADJUSTER ASSEMBLY


    1. A01NJ2I

      Install the bush.

    2. A01NKWJ

      Install the lumbar support adjuster assembly with the guide and 2 screws.

    3. Connect the connector.

    4. A01NIPM

      Engage the 2 guides as shown in the illustration.

    5. A01NMZE

      Engage the 4 guides and install the front seatback spring sub-assembly.

    6. A01NM16

      Install the seatback felt with the 4 guides.

  2. Click here

    INSTALL SEATBACK CLIMATE CONTROL BLOWER (w/ Climate Control Seat System)


    1. A01NM2N

      Using a T30 ''TORX'' socket, install the seatback climate control blower and the seatback climate control cover to the seat frame with the 6 ''TORX'' bolts.

      2.6 N*m 27 kgf*cm 23 in.*lbf

    2. for Driver Side:


      1. A01NM0T

        Engage the 3 clamps and install the wire harness.

      2. Connect the connector.

    3. for Front Passenger Side:


      1. A01NKMT

        Engage the clamp and install the wire harness.

      2. Connect the connector.

  3. Click here

    INSTALL FRONT SEATBACK COVER WITH PAD


    1. A01NMNPE01

      Temporarily install the side airbag so that it is stored inside the separate type front seatback cover with pad.

      Table 1. Text in Illustration
      *1 Side Airbag
      Note:

      Make sure that the side airbag is stored inside the pad correctly. Otherwise the side airbag may not deploy properly.

    2. A01NKLAE01

      Install bracket A onto the bolt.

      Table 2. Text in Illustration
      *1 Bracket A *2 Bracket B

    3. Install bracket B onto the bolt and insert the guide.

    4. Install the front seatback cover bracket with the nut.

      5.6 N*m 57 kgf*cm 50 in.*lbf
      CAUTION:

      • For vehicles with side airbags, the seatback cover must be securely installed. Otherwise, the side airbags may not deploy properly.

      • Make sure that the strap is not twisted after installing the bracket.

      • Install the bracket securely.

    5. A01NKGF

      Engage the 6 hooks as shown in the illustration.

    6. A01NIIK

      Using hog ring pliers, install the seatback cover to the seat frame with 5 new hog rings.

      Note:

      • Be careful not to damage the cover.

      • When installing the hog rings, take care to minimize wrinkles as much as possible.

    7. A01NIOP

      Engage the 2 hooks and install the front seatback cover with pad.

  4. Click here

    INSTALL FRONT SEAT HEADREST SUPPORT


    1. A01NKCE

      Engage the 4 claws and install the 2 front seat headrest supports.

  5. Click here

    INSTALL FRONT SEATBACK BOARD COVER SUB-ASSEMBLY


    1. A01NJNH

      Engage the 2 hooks to install the front seatback board cover sub-assembly.

  6. Click here

    INSTALL FRONT SEATBACK BOARD SUB-ASSEMBLY


    1. A01NJSO

      Engage the 2 guides as shown in the illustration.

    2. A01NIVF

      Install the front setback board sub-assembly with the 2 screws.

  7. Click here

    INSTALL NO. 2 TELEVISION BASE (w/ Rear Seat Entertainment System)


    1. A01NNFW

      Engage the 2 guides.

    2. Install the 5 clips.

    3. A01NJBC

      Install the No. 2 television base with the 4 screws.

  8. Click here

    INSTALL TELEVISION DISPLAY ASSEMBLY WITH COVER (w/ Rear Seat Entertainment System)


    1. Install the television display assembly with the 3 nuts.

      5.5 N*m 56 kgf*cm 49 in.*lbf

    2. Connect the connector.

  9. Click here

    INSTALL TELEVISION BASE COVER CAP (w/ Rear Seat Entertainment System)


    1. Engage the 3 guides and 3 claws to install the television base cover cap.

  10. Click here

    INSTALL FRONT SEAT CUSHION COVER WITH PAD (w/o Seat Cushion Front Edge Adjustment Function)


    1. w/o Climate Control Seat System:


      1. A01NI60

        Engage the 5 clamps.

    2. w/ Climate Control Seat System:


      1. A01NN2L

        Engage the 6 clamps.

      2. Connect the 2 connectors.

    3. for Front Passenger Side:


      1. A01NK6X

        Engage the 2 clamps and connect the occupant detection sensor connector.

    4. A01NML4

      Engage each hook as shown in the illustration.

    5. Install the 2 clips.

    6. A01NK7T

      Engage the 6 hooks and install the front seat cushion cover with pad.

  11. Click here

    INSTALL FRONT SEAT CUSHION COVER WITH PAD (w/ Seat Cushion Front Edge Adjustment Function)


    1. A01NJ87

      Using hog ring pliers, install 2 new hog rings.

      Note:

      • Be careful not to damage the cover.

      • When installing the hog rings, take care to minimize wrinkles as much as possible.

    2. A01NMDO

      Engage the 4 hooks.

    3. A01NMFT

      Engage each hook as shown in the illustration.

    4. for Front Passenger Side:


      1. A01NK6X

        Engage the 2 clamps and connect the occupant detection sensor connector.

    5. Install the 2 clips.

    6. A01NK7T

      Engage the 6 hooks and install the front seat cushion cover with pad.

  12. Click here

    INSTALL POWER SEAT SWITCH


    1. A01NMNG

      Connect the 2 connectors.

    2. A01NIIB

      Engage the guide.

    3. Install the power seat switch with the 3 screws.

  13. Click here

    INSTALL FRONT SEAT CUSHION INNER SHIELD


    1. A01NLN7

      Engage the guide and temporarily install the front seat cushion inner shield as shown in the illustration.

    2. A01NI6K

      Engage the claw.

    3. Install the front seat cushion inner shield with the screw.

  14. Click here

    INSTALL FRONT SEAT CUSHION SHIELD ASSEMBLY


    1. w/ Seat Cushion Front Edge Adjustment Function:


      1. A01NMZJ

        Connect the connector.

      2. Engage the 2 clamps to the install the seat wire to front seat cushion shield assembly with seat variable cushion switch.

    2. A01NJAX

      Connect the connector to the lumbar switch.

    3. A01NIC5

      Engage the guide and claw.

    4. Install the front seat cushion shield assembly with the 5 screws.

    5. A01NIX4

      Engage the 2 hooks and install the 2 rubber bands of the front seatback board to the seat frame.

  15. Click here

    INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB


    1. A01NMJR

      Engage the 4 claws and install the slide and vertical power seat switch knob.

  16. Click here

    INSTALL RECLINING POWER SEAT SWITCH KNOB


    1. A01NK6H

      Engage the 4 claws and install the reclining power seat switch knob.

  17. Click here

    INSTALL FRONT SEAT INNER BELT ASSEMBLY


    1. A01NJV8E01

      Install the front seat inner belt assembly with the nut.

      Table 3. Text in Illustration
      *1 Protruding Part
      42 N*m 428 kgf*cm 31 ft.*lbf
      Note:

      Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding part of front seat adjuster.

    2. Connect each connector and clamp.

  18. Click here

    INSTALL FRONT SEAT ASSEMBLY


    1. Check the power seat operation.

    2. Check the seat heater operation.

      w/o Climate Control Seat System:


      1. Power switch on (IG).

      2. Turn the seat heater switch on.

      3. Wait 5 minutes or more and confirm that the seat surface becomes warm.

  19. Click here

    INSTALL REAR INNER SEAT TRACK BRACKET COVER


    1. A01NMQK

      Engage the 4 claws and install the rear inner seat track bracket cover as shown in the illustration.

  20. Click here

    INSTALL REAR OUTER SEAT TRACK BRACKET COVER


    1. A01NLX5

      Engage the 4 claws to install the rear outer seat track bracket cover as shown in the illustration.

  21. Click here

    INSTALL FRONT INNER SEAT TRACK BRACKET COVER


    1. Operate the slide and vertical power seat switch knob and move the front seat assembly to the rearmost position.

    2. A01NL6O

      Engage the 2 guides and 2 claws to install the front inner seat track bracket cover as shown in the illustration.

  22. Click here

    INSTALL FRONT OUTER SEAT TRACK BRACKET COVER


    1. A01NJWG

      Engage the 2 guides and 2 claws to install the front outer seat track bracket cover as shown in the illustration.

  23. Click here

    INSTALL FRONT SEAT HEADREST ASSEMBLY


    1. A01NN49

      Install the front seat headrest assembly as shown in the illustration.

  24. Click here

    INSPECT FRONT SEAT ASSEMBLY


    1. Check the power seat operation.

    2. Check the seat heater operation.

      w/o Climate Control Seat System:


      1. Power switch on (IG).

      2. Turn the seat heater switch on.

      3. Wait 5 minutes or more and confirm that the seat surface becomes warm.

  25. Click here

    INSPECT SRS WARNING LIGHT

    (Click here)

  26. Click here

    INSTALL REAR DECK FLOOR BOX


    1. A01NIBL

      Install the rear deck floor box with the 3 clips.