Click here

SEAT MEMORY SWITCH INSTALLATION

Click here
Click here Click here
  1. Click here

    INSTALL SEAT MEMORY SWITCH


    1. A01NKQJ

      Install the seat memory switch with the 2 screws.

  2. Click here

    INSTALL FRONT DOOR INNER GLASS WEATHERSTRIP


    1. A01NN7K

      Engage the 4 claws and install the front door inner glass weatherstrip as shown in the illustration.

  3. Click here

    INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY


    1. Install a new front door trim board retainer (green).

    2. A01NKVJ

      Connect the front door lock remote control cable assembly and front door inside locking cable assembly.

    3. Connect each connector.

    4. A01NJJE

      Engage the front door trim board sub-assembly with the 4 claws of the front door inner glass weatherstrip as shown in the illustration.

    5. A01NI5PE01

      Engage the 10 clips, front door trim board retainer and install the front door trim board sub-assembly.

      Table 1. Text in Illustration
      *1 Front Door Trim Board Retainer

    6. Install the 3 screws.

      (A)
      3.5 N*m 36 kgf*cm 31 in.*lbf
  4. Click here

    INSTALL NO. 1 FRONT DOOR STIFFENER CUSHION


    1. A01NLIE

      Install the No. 1 front door stiffener cushion with the screw.

  5. Click here

    INSTALL COURTESY LIGHT ASSEMBLY


    1. Connect the connector.

    2. A01NMJJE02

      Engage the claw to install the courtesy light assembly.

      Table 2. Text in Illustration
      *A for LH Side
      *B for RH Side
  6. Click here

    INSTALL DOOR ARMREST COVER


    1. A01NIHP

      Install the door armrest cover.

  7. Click here

    INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Driver Side)


    1. A01NL4W

      Connect the connector.

    2. Engage the 2 clips and 5 claws, and install the power window regulator master switch assembly with front door armrest base panel.

  8. Click here

    INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Front Passenger Side)


    1. A01NIDE

      Connect the connector.

    2. Engage the 2 clips and 5 claws, and install the power window regulator switch assembly with front door armrest base panel.

  9. Click here

    INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG


    1. A01NIF3

      Engage the 3 claws and install the front door inside handle bezel plug.