Click here

REAR SEAT ASSEMBLY (for RH Side) DISASSEMBLY

Click here
Click here Click here
  1. Click here

    REMOVE REAR SEAT INNER BELT ASSEMBLY


    1. Pull the reclining adjuster release handle to recline the seatback.

    2. Disconnect the connector and disengage each clamp.

    3. A01NKER

      Remove the bolt and the rear seat inner belt assembly.

      Tip:

      When the bolt is removed, the rear seat inner belt assembly is also removed.

  2. Click here

    REMOVE UPPER CENTER SEAT HINGE COVER LH


    1. A01NLVU

      Remove the screw and the upper center seat hinge cover LH.

  3. Click here

    REMOVE REAR CENTER SEAT ASSEMBLY


    1. A01NN9E

      Disengage the elastic band.

    2. A01NKR5

      Remove the 4 bolts and rear center seat assembly.

  4. Click here

    REMOVE RECLINING COVER PROTECTOR LH


    1. A01NLE7

      Remove the screw and clip.

    2. A01NLCK

      Remove the reclining cover protector LH as shown in the illustration.

  5. Click here

    REMOVE RECLINING COVER PROTECTOR RH


    1. A01NIFM

      Remove the screw and clip.

    2. A01NJTV

      Remove the reclining cover protector RH as shown in the illustration.

  6. Click here

    REMOVE CENTER SEAT CUSHION COVER WITH PAD


    1. A01NKRE

      Disengage the 2 hooks.

    2. A01NM00

      Disengage each hook and remove the center seat cushion cover with pad as shown in the illustration.

  7. Click here

    REMOVE CENTER SEAT CUSHION COVER SUB-ASSEMBLY


    1. A01NJP3

      Remove the center seat cushion cover sub-assembly as shown in the illustration.

  8. Click here

    REMOVE REAR CENTER SEATBACK COVER


    1. A01NKP4

      Disengage the 4 claws and remove the rear center seatback cover.

  9. Click here

    REMOVE REAR SEATBACK LOCK COVER RH


    1. A01NNBIE01

      Using a screwdriver wrapped with protective tape, disengage the claw and 4 guides, and remove the rear seatback lock cover RH.

      Table 1. Text in Illustration
      *1 Protective Tape
  10. Click here

    REMOVE REAR SEATBACK BOARD SUB-ASSEMBLY


    1. A01NISL

      Disengage the 4 clips and remove the rear seatback board sub-assembly.

  11. Click here

    REMOVE REAR SEAT CENTER HEADREST SUPPORT LH


    1. A01NMQ7

      Disengage the 2 claws and remove the rear seat center headrest support LH.

  12. Click here

    REMOVE REAR SEAT CENTER HEADREST SUPPORT RH


    1. A01NJ9Q

      Disengage the 2 claws and remove the rear seat center headrest support RH.

  13. Click here

    REMOVE COAT HOOK CAP


    1. A01NIP6

      Disengage the 2 claws and guide and remove the coat hook cap as shown in the illustration.

  14. Click here

    REMOVE NO. 1 SEATBACK COVER


    1. A01NK23

      Remove the screw.

    2. Disengage the 2 claws and remove the No. 1 seatback cover.

  15. Click here

    REMOVE NO. 2 CENTER SEATBACK COVER


    1. A01NMWD

      Disconnect the rod as shown in the illustration.

    2. A01NK32

      Remove the 2 screws.

    3. Disengage the guide and remove the No. 2 center seatback cover.

  16. Click here

    REMOVE CENTER SEAT CUSHION FRAME SUB-ASSEMBLY


    1. A01NJSY

      Using a T45 "TORX" socket, remove the 2 "TORX" bolts, bushes, and the center seat cushion frame sub-assembly.

  17. Click here

    REMOVE REAR SEATBACK HINGE LH


    1. A01NII3

      Using a T45 "TORX" socket, remove the "TORX" bolts, bushes, and the rear seatback hinge LH.

  18. Click here

    REMOVE REAR CENTER SEATBACK HINGE


    1. A01NMDG

      Using a T45 "TORX" socket, remove the "TORX" bolts, bushes, and the rear center seatback hinge.

  19. Click here

    REMOVE REAR SEATBACK MOULDING LH


    1. A01NKS5

      Remove the 3 screws.

    2. Disengage the 2 guides and remove the rear seatback moulding LH.

  20. Click here

    REMOVE REAR SEATBACK MOULDING RH


    1. A01NKL3

      Remove the 3 screws.

    2. Disengage the 2 guides and remove the rear seatback moulding RH.

  21. Click here

    REMOVE REAR SEAT CENTER ARMREST SUPPORT RH


    1. A01NL6Z

      Using a T45 "TORX" socket, remove the "TORX" bolts and bushes.

    2. A01NJP5

      Remove the nut.

    3. Disengage the guide and remove the rear seat center armrest support RH.

  22. Click here

    REMOVE NO. 2 REAR SEAT RECLINING SPACER


    1. A01NLFO

      Remove the No. 2 rear seat reclining spacer from the rear seat center armrest assembly.

  23. Click here

    REMOVE REAR SEAT CENTER ARMREST ASSEMBLY

  24. Click here

    REMOVE CUP HOLDER


    1. A01NIM7

      Remove the 2 screws.

    2. Disengage the 2 clips and remove the cup holder.

  25. Click here

    REMOVE REAR SEAT CENTER ARMREST DOOR SUB-ASSEMBLY


    1. A01NLJO

      Remove the 2 screws and the rear seat center armrest door sub-assembly.

  26. Click here

    REMOVE REAR SEAT CENTER ARMREST BOX


    1. A01NL0T

      Remove the rear seat center armrest box.

  27. Click here

    REMOVE REAR SEAT COVER CAP


    1. A01NJ4JE01

      Using a screwdriver wrapped with protective tape, disengage the 3 claws and remove the rear seat cover cap.

      Table 2. Text in Illustration
      *1 Protective Tape
  28. Click here

    REMOVE NO. 1 RECLINING ADJUSTER RELEASE HANDLE RH


    1. A01NKH1

      Remove the 3 screws and remove the No. 1 reclining adjuster release handle RH.

  29. Click here

    REMOVE REAR SEAT CUSHION MOULDING RH


    1. A01NK0O

      Remove the 2 screws.

    2. Disengage the 2 guides and remove the rear seat cushion moulding RH.

  30. Click here

    REMOVE REAR SEAT CUSHION COVER WITH PAD


    1. A01NLLU

      Disengage the 2 hooks.

    2. A01NJMK

      Disengage each hook.

    3. A01NM06

      Remove the 2 hog rings.

    4. A01NII7

      Remove the 2 hog rings and the rear seat cushion cover with pad.

    5. A01NK44

      Disengage the 2 elastic bands.

  31. Click here

    REMOVE SEPARATE TYPE REAR SEAT CUSHION COVER


    1. A01NKYT

      Remove the 11 hog rings and the separate type rear seat cushion cover.

  32. Click here

    REMOVE REAR SEATBACK LOCK STRIKER PROTECTOR


    1. A01NLHJ

      Remove the rear seatback lock striker protector.

  33. Click here

    REMOVE REAR SEAT LOCK STRIKER


    1. A01NLZZ

      Using a T45 "TORX" socket, remove the rear seat lock striker.

  34. Click here

    REMOVE TONNEAU COVER HOOK HOLDER


    1. A01NL3Z

      Remove the 2 screws and the 2 tonneau cover hook holders.

  35. Click here

    REMOVE REAR SEATBACK COVER RH


    1. A01NJXM

      Disengage the 4 claws and remove the rear seatback cover RH.

  36. Click here

    REMOVE REAR SEATBACK BOARD CARPET ASSEMBLY RH


    1. A01NN71

      Disengage the 2 clips.

    2. Disengage the guide and remove the rear seatback board carpet assembly RH.

  37. Click here

    REMOVE NO. 1 FOLD SEAT STOPPER BAND ASSEMBLY


    1. A01NN27

      Remove the bolt.

    2. Disengage the guide and remove the No. 1 fold stopper band assembly.

  38. Click here

    REMOVE SEAT BELT ANCHOR COVER CAP


    1. A01NJO1

      Disengage the 2 claws and remove the seat belt anchor cover cap.

  39. Click here

    REMOVE REAR SEAT SHOULDER BELT HOLE COVER


    1. A01NI1AE01

      Move the rear seat shoulder belt hole cover in the direction indicated by the arrow in the installation to disengage the 2 claws (A).

    2. Move the rear seat shoulder belt hole cover in the direction indicated by the arrow in the illustration to disengage the 2 claws (B) and remove the cover.

  40. Click here

    DISCONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY


    1. A01NI6O

      Remove the bolt and disconnect the rear center seat outer belt assembly.

  41. Click here

    REMOVE REAR SEAT HEADREST SUPPORT LH


    1. A01NM66

      Disengage the 2 claws and remove the rear seat headrest support LH.

  42. Click here

    REMOVE REAR SEAT HEADREST SUPPORT RH


    1. A01NJ4A

      Disengage the 2 claws and remove the rear seat headrest support RH.

  43. Click here

    REMOVE REAR SEATBACK COVER WITH PAD


    1. A01NICGE01

      Disengage the 2 fasteners.

      Table 3. Text in Illustration
      *1 Fastener
    2. A01NJSV

      Disengage the 5 hooks.

    3. Remove the 6 hog rings.

    4. A01NN43

      Turn back the separate type rear seatback cover to remove the nut, and separate the bracket of the separate type rear seatback cover.

    5. A01NN5V

      Remove the bolt and rear seat belt hook.

    6. A01NN0I

      Disengage the hook.

    7. Remove the hog ring and the rear seatback cover with pad.

  44. Click here

    REMOVE REAR SEAT SHOULDER BELT COVER


    1. A01NM2F

      Disengage the 3 claws to remove the belt support plate.

    2. A01NIMK

      Disengage the claw and guide, and remove the rear seat shoulder belt cover as shown in the illustration.

  45. Click here

    REMOVE REAR CENTER SEAT OUTER BELT ASSEMBLY


    1. A01NJTB

      Remove the bolt, nut and the rear center seat outer belt assembly.

  46. Click here

    REMOVE SEPARATE TYPE REAR SEATBACK COVER


    1. A01NM6Z

      Remove the 12 hog rings and the separate type rear seatback cover.

  47. Click here

    REMOVE REAR SEATBACK COVER RH


    1. A01NNBS

      Remove the 2 screws.

    2. Disengage the claw and remove the rear seatback cover RH.

  48. Click here

    REMOVE REAR SEAT CUSHION MOULDING RH


    1. A01NIHF

      Remove the 3 screws.

    2. Disengage the 3 claws and remove the rear seat cushion moulding RH.

  49. Click here

    REMOVE REAR SEAT CUSHION SIDE COVER LH


    1. A01NNE4

      Remove the 2 screws.

    2. Disengage the claw and remove the rear seat cushion side cover LH.

  50. Click here

    REMOVE REAR SEAT RECLINING INNER COVER RH


    1. A01NK09

      Remove the screw.

    2. Disengage the 2 guides and remove the rear seat reclining inner cover RH.

  51. Click here

    REMOVE NO. 1 REAR SEAT COVER


    1. A01NM2V

      Remove the screw.

    2. Remove the No. 1 rear seat cover.

  52. Click here

    REMOVE NO. 2 REAR SEAT COVER


    1. A01NJY5

      Remove the screw.

    2. Remove the No. 2 rear seat cover.

  53. Click here

    REMOVE REAR SEAT RECLINING CONTROL CABLE


    1. Disengage the 6 control cable clamps.

    2. A01NJYH

      Disengage the 4 rear seat hooks and remove the rear seat reclining control cable.

    3. A01NIF0

      Disengage the claw and remove the rear seat hook from the rear seat reclining control cable.

  54. Click here

    REMOVE REAR SEAT CUSHION SPRING ASSEMBLY RH


    1. A01NJFC

      Using a T45 "TORX" socket, remove the 4 "TORX" bolts, bushes, and the rear seat cushion spring assembly RH.